Choose a product:

065-1100 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/ST, 2 km

065-1100LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Multimode/ST, 2 km

065-1100NS - Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Multimode/ST, 2 km

065-1110 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/SC, 2 km

065-1110LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Multimode/SC, 2 km

065-1110NS - Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Multimode/SC, 2 km

065-1120 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 15 km

065-1120ED - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 40 km

065-1120EDLFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 40 km

065-1120LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 15 km

065-1120NS - Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Singlemode/SC, 20 km

065-1120XLD - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 75 km

065-1120XLDLFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 75 km

065-1130 - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 15 km to Multimode/ST, 2 km

065-1130ED - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 40 km to Multimode/ST, 2 km

065-1130XLD - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 75 km to Multimode/ST, 2 km

065-1132 - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 15 km to Multimode/SC, 2 km

065-1132ED - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 40 km to Multimode/SC, 2 km

065-1132XLD - Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 100BaseFX Singlemode to Multimode Converters 100BaseFX Singlemode/SC, 75 km to Multimode/SC, 2 km

065-1140 - Signamax Connectivity Systems’ Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to RJ-45 and either multimode or singlemode fiber optic ports on standard Ethernet devices. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 10BaseT to 10BaseFL Converters 10BaseT to 10BaseFL, Multimode/ST, 2 km

065-1150 - Signamax Connectivity Systems’ Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to RJ-45 and either multimode or singlemode fiber optic ports on standard Ethernet devices. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 10BaseT to 10BaseFL Converters 10BaseT to 10BaseFL, Singlemode/SC, 20 km

065-1160 - Signamax Connectivity Systems’ 065-1160 model allows interconnection between 10BaseT twisted-pair and 10Base2 coaxial Thinnet cable Ethernet networks. The 065-1160 Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. It can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. 10BaseT to 10Base2 Converter 10BaseT to 10Base2, RJ-45 to BNC

065-1162 - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Multimode/ST, 2 km

065-1162SC - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Multimode/SC, 2 km

065-1162SM - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Singlemode/SC, 20 km

065-1163FSC - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters RS-232/422/485 to 10/100BaseFX, Multimode/SC, 2 km

065-1163FSM - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters RS-232/422/485 to 10/100BaseFX, Singlemode/SC, 20 km

065-1163FSMED - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters RS-232/422/485 to 10/100BaseFX, Singlemode/SC, 30 km

065-1163FST - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters RS-232/422/485 to 10/100BaseFX, Multimode/ST, 2 km

065-1163T - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters RS-232/422/485 to 10/100BaseTX, RJ-45, 100 meters

065-1164 - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-232 to Fiber Converter, Multimode/ST, 2 km

065-1164SC - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-232 to Fiber Converter, Multimode/SC, 2 km

065-1164SM - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters RS-232 to Fiber Converter, Singlemode/SC, 20 km

065-1170 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/VF-45, 2 km

065-1170LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Converter VF-45 Multimode

065-1172 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/MT-RJ, 2 km

065-1172LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Converter MT-RJ Multimode

065-1174 - Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model. Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection. 10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/LC, 2 km

065-1174LFS - Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model. The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable. 10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Converter LC Multimode

065-1176AEDLFS - Signamax Connectivity Systems’ Switching Single Fiber Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data normally carried over two strands of fiber optic cable to be carried over a single strand of fiber optic cable, utilizing two different light spectra to carry signals in both directions simultaneously. This technology doubles the capacity of a company's fiber optic network, allowing a carrier or an enterprise business to minimize its operational costs by eliminating or delaying the deployment of additional fiber optic capacity. These converters are available in singlemode only, and span distances of up to 40 kilometers (24.85 miles) with the 065-1176AEDLFS and 065-1176BEDLFS models. Since WDM Switching Media Converters utilize two different light spectra with one end of a circuit transmitting on the other end’s receive frequency (and vice versa), they must be used in A/B pairs. A circuit utilizing these converters would therefore use a single strand of singlemode fiber optic cable plus one each of the 065-1176ALFS and 065-1176BLFS, or one each of the 065-1176AEDLFS and 065-1176BEDLFS and 065-1176BLFS, depending upon the distance spanned. All Signamax WDM converters are equipped with Link Fault Signaling to provide the means for an SNMP-managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. Each WDM Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port, and features store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port is also provided for convenient connections. Single Fiber WDM Media Converters with Link Fault Signaling 10/100 to 100BaseFX, SM/SC, 40 km, Tx=1310 nm; Rx=1550 nm

065-1176ALFS - Signamax Connectivity Systems’ Switching Single Fiber Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data normally carried over two strands of fiber optic cable to be carried over a single strand of fiber optic cable, utilizing two different light spectra to carry signals in both directions simultaneously. This technology doubles the capacity of a company's fiber optic network, allowing a carrier or an enterprise business to minimize its operational costs by eliminating or delaying the deployment of additional fiber optic capacity. These converters are available in singlemode only, and span distances of up to 40 kilometers (24.85 miles) with the 065-1176AEDLFS and 065-1176BEDLFS models. Since WDM Switching Media Converters utilize two different light spectra with one end of a circuit transmitting on the other end’s receive frequency (and vice versa), they must be used in A/B pairs. A circuit utilizing these converters would therefore use a single strand of singlemode fiber optic cable plus one each of the 065-1176ALFS and 065-1176BLFS, or one each of the 065-1176AEDLFS and 065-1176BEDLFS and 065-1176BLFS, depending upon the distance spanned. All Signamax WDM converters are equipped with Link Fault Signaling to provide the means for an SNMP-managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. Each WDM Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port, and features store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port is also provided for convenient connections. Single Fiber WDM Media Converters with Link Fault Signaling 10/100 to 100BaseFX, SM/SC, 20 km, Tx=1310 nm; Rx=1550 nm

065-1176BEDLFS - Signamax Connectivity Systems’ Switching Single Fiber Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data normally carried over two strands of fiber optic cable to be carried over a single strand of fiber optic cable, utilizing two different light spectra to carry signals in both directions simultaneously. This technology doubles the capacity of a company's fiber optic network, allowing a carrier or an enterprise business to minimize its operational costs by eliminating or delaying the deployment of additional fiber optic capacity. These converters are available in singlemode only, and span distances of up to 40 kilometers (24.85 miles) with the 065-1176AEDLFS and 065-1176BEDLFS models. Since WDM Switching Media Converters utilize two different light spectra with one end of a circuit transmitting on the other end’s receive frequency (and vice versa), they must be used in A/B pairs. A circuit utilizing these converters would therefore use a single strand of singlemode fiber optic cable plus one each of the 065-1176ALFS and 065-1176BLFS, or one each of the 065-1176AEDLFS and 065-1176BEDLFS and 065-1176BLFS, depending upon the distance spanned. All Signamax WDM converters are equipped with Link Fault Signaling to provide the means for an SNMP-managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. Each WDM Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port, and features store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port is also provided for convenient connections. Single Fiber WDM Media Converters with Link Fault Signaling 10/100 to 100BaseFX, SM/SC, 40 km, Tx=1550 nm; Rx=1310 nm

065-1176BLFS - Signamax Connectivity Systems’ Switching Single Fiber Wave Division Multiplexing (WDM) Media Converters with Link Fault Signaling allow data normally carried over two strands of fiber optic cable to be carried over a single strand of fiber optic cable, utilizing two different light spectra to carry signals in both directions simultaneously. This technology doubles the capacity of a company's fiber optic network, allowing a carrier or an enterprise business to minimize its operational costs by eliminating or delaying the deployment of additional fiber optic capacity. These converters are available in singlemode only, and span distances of up to 40 kilometers (24.85 miles) with the 065-1176AEDLFS and 065-1176BEDLFS models. Since WDM Switching Media Converters utilize two different light spectra with one end of a circuit transmitting on the other end’s receive frequency (and vice versa), they must be used in A/B pairs. A circuit utilizing these converters would therefore use a single strand of singlemode fiber optic cable plus one each of the 065-1176ALFS and 065-1176BLFS, or one each of the 065-1176AEDLFS and 065-1176BEDLFS and 065-1176BLFS, depending upon the distance spanned. All Signamax WDM converters are equipped with Link Fault Signaling to provide the means for an SNMP-managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. Each WDM Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port, and features store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port is also provided for convenient connections. Single Fiber WDM Media Converters with Link Fault Signaling 10/100 to 100BaseFX, SM/SC, 20 km, Tx=1550 nm; Rx=1310 nm

065-1180 - Signamax Connectivity Systems’ Model 065-1180 Rack Mount Chassis is a carrier or enterprise level rack mounting system designed to accommodate the line of Signamax Ethernet Media Converters. Multi-functional chassis allows the same Media Converter to be used as either a standalone or as a rack mountable component. The system ships standard with two hot-swappable, fully redundant, load-sharing power supplies to ensure continued availability of the media converters in the event of a power supply failure. It also ships with three fully redundant, load-sharing cooling fans as a standard configuration. The Signamax model 065-1180 Rack Mount Chassis is a system worthy of any TELCO or Interexchange Carrier installation. It is easy to maintain, easy to service, and absorbs substantial abuse without failure. 8-Bay Rack Mount Media Converter Chassis Spare Individual Fan Assembly 8-Bay Rack Mount Media Converter Chassis, AC

065-1180DC - Signamax Connectivity Systems’ Model 065-1180 Rack Mount Chassis is a carrier or enterprise level rack mounting system designed to accommodate the line of Signamax Ethernet Media Converters. Multi-functional chassis allows the same Media Converter to be used as either a standalone or as a rack mountable component. The system ships standard with two hot-swappable, fully redundant, load-sharing power supplies to ensure continued availability of the media converters in the event of a power supply failure. It also ships with three fully redundant, load-sharing cooling fans as a standard configuration. The Signamax model 065-1180 Rack Mount Chassis is a system worthy of any TELCO or Interexchange Carrier installation. It is easy to maintain, easy to service, and absorbs substantial abuse without failure. 8-Bay Rack Mount Media Converter Chassis 8-Bay Rack Mount Media Converter Chassis, 48V DC

065-1185 - The Signamax 065-1185 16-Bay Rack Mount Media Converter Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure. High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime. The 065-1185 has a choice of power supply configurations, supporting AC power for 110 volt or 220 volt power systems or -48 volt DC power for carrier operations. 16-Bay Rack Mount Media Converter Chassis 16-Bay Rack Mount Media Converter Chassis, AC

065-1185DC - The Signamax 065-1185 16-Bay Rack Mount Media Converter Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure. High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime. The 065-1185 has a choice of power supply configurations, supporting AC power for 110 volt or 220 volt power systems or -48 volt DC power for carrier operations. 16-Bay Rack Mount Media Converter Chassis 16-Bay Rack Mount Media Converter Chassis, 48V DC

065-1190 - Signamax Connectivity Systems’ ATM Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs to fiber WANs over longer distances by integrating singlemode fiber optic cable into the LAN, by providing a multimode interface to singlemode fiber carrier demarcation points. Models are available for singlemode to multimode conversion for 155 Mbps and 622 Mbps Asynchronous Transfer Mode (ATM) applications transported over a Synchronous Optical Network (SONET). Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. ATM Singlemode to Multimode Converters ATM 155 Mbps Singlemode/SC, 20 km to ST/Multimode, 2 km

065-1190HS - Signamax Connectivity Systems’ ATM Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs to fiber WANs over longer distances by integrating singlemode fiber optic cable into the LAN, by providing a multimode interface to singlemode fiber carrier demarcation points. Models are available for singlemode to multimode conversion for 155 Mbps and 622 Mbps Asynchronous Transfer Mode (ATM) applications transported over a Synchronous Optical Network (SONET). Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations. ATM Singlemode to Multimode Converters ATM 622 Mbps Singlemode/SC, 20 km to ST/Multimode, 2 km

065-1194 - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseSX to 1000BaseLX, MM/SC to SM/SC, 10 km

065-1194ED - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseSX to 1000BaseLX, MM/SC to SM/SC, 20 km

065-1195 - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseT to 1000BaseSX, MM/SC, 220 m - 62.5/125, 550 m - 50/125

065-1196 - Signamax Connectivity Systems’ 10/100/1000 Switching Media Converter provides an intelligent solution for long distance connections between legacy 10BaseT and 100BaseTX networks and the newer 1000Base Gigabit Ethernet networks. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps connected to either a 10BaseT, 100BaseTX, or a 1000BaseT network, while remaining completely 1000BaseSX standard-compliant for the fiber optic connection. The fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub. Each model 065-1196 Media Converter provides a 10/100/1000BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Auto-MDIX capability on the twisted-pair port allows convenient connection. 10/100/1000 Switching Converters 10/100/1000BaseT/TX to 1000BaseFX, Multimode/SC

065-1197 - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseT to 1000BaseLX, Singlemode/SC, 10 km

065-1197ED - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseT to 1000BaseLX, Singlemode/SC, 20 km

065-1198XLD - Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications. These converters maintain the same form factor as other Signamax media converters, allowing use in the Model 065-1180 8-Bay or 065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are available. Gigabit Ethernet Media Converters 1000BaseLX to 1000BaseLX, Repeater, Singlemode/SC, 20 km

065-11DINMT - Signamax Connectivity Systems’ 065-1163 series of RS-232/422/485 serial data to Ethernet media converters are the perfect answer to the problem of integrating serial data devices into a convergent Ethernet-based network. These converters accept serial data on one port in either RS-232, RS-422, or RS-485 format and convert the serial data stream into Ethernet/Fast Ethernet framed and formatted packets. These packets can then be transported across an Ethernet, Fast Ethernet, or Gigabit Ethernet network to another 065-1163 series converter, which reconstructs the Ethernet packets into the original serial data bit stream. Models are available to connect serial data devices to your existing Ethernet / Fast Ethernet network over twisted-pair or fiber optic cable at distances up to 30 kilometers (over 18.6 miles). This avoids the requirement for a separate serial data network and its associated cabling plan. Serial Data to Ethernet Converters DIN Rail mounts bracket for 065-11xx series media converters

065-11DITMT - Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations. Serial Data to Fiber Converters DIN Rail mounts bracket for 065-11xx series media converters

065-1200LC74 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX MM/LC, 2 km

065-1200MT72 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX MM/MT-RJ 2 km

065-1200SC10 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX MM/SC, 2 km

065-1200SC20 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX SM/SC, 15 km

065-1200SC20ED - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX SM/SC, 40 km

065-1200SC20XLD - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX SM/SC, 75 km

065-1200SC95 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 1000BaseT to 1000BaseSX MM/SC, 220/550 m

065-1200ST00 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX MM/ST, 2 km

065-1200VF70 - The Signamax 065-1200 12-Channel Rack Mount Media Converter is a perfect solution for large installations that utilize many of the same type of media converters. The 065-1200 contains 12 channels of media conversion in a standard rack mountable case only one rack unit high. This extremely high port density allows the maximum number of media converter channels per rack for enterprise-level businesses and carriers. Redundant fan-cooled power supplies ensure system uptime. 12-Channel Fiber Optic Media Converters 12-Channel 10/100BaseT/TX to 100BaseFX MM/VF-45 2 km

065-2110 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers MII to 100BaseFX Transceiver, Multimode/SC, 2 km

065-2120 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers MII to 100BaseFX Transceiver, Multimode/ST, 2 km

065-2130 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers MII to 100BaseFX SM Transceiver, Singlemode/SC, 20 km

065-2140 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers 10BaseFL to AUI Transceiver, Multimode/ST, 2 km

065-2150 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers 10Base2 to AUI Transceiver, BNC, 185 meter

065-2160 - The 065-2140, 065-2150, and 065-2160 fiber optic transceivers permit devices with an Attachment Unit Interface (AUI) to directly connect to either fiber optic cable, coaxial ThinNet cable, or twisted pair cable with ease. Where media converters require a source of external power, these transceivers draw their power from the AUI or the Media Independent Interface (MII) itself, making this solution both cost-effective and space-efficient in simple 10Base applications Fiber Optic Transceivers 10BaseT to AUI Transceiver, RJ-45, 100 meter

1180FAN - Signamax Connectivity Systems’ Model 065-1180 Rack Mount Chassis is a carrier or enterprise level rack mounting system designed to accommodate the line of Signamax Ethernet Media Converters. Multi-functional chassis allows the same Media Converter to be used as either a standalone or as a rack mountable component. The system ships standard with two hot-swappable, fully redundant, load-sharing power supplies to ensure continued availability of the media converters in the event of a power supply failure. It also ships with three fully redundant, load-sharing cooling fans as a standard configuration. The Signamax model 065-1180 Rack Mount Chassis is a system worthy of any TELCO or Interexchange Carrier installation. It is easy to maintain, easy to service, and absorbs substantial abuse without failure. 8-Bay Rack Mount Media Converter Chassis Spare Individual Fan Assembly

1185FAN - The Signamax 065-1185 16-Bay Rack Mount Media Converter Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure. High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime. The 065-1185 has a choice of power supply configurations, supporting AC power for 110 volt or 220 volt power systems or -48 volt DC power for carrier operations. 16-Bay Rack Mount Media Converter Chassis Spare Individual Fan Assembly

1480FAN - The Signamax™ 065-1480 18-Bay Managed Media Converter Rack Mount Chassis provides full SNMP management capabilities for mission-critical installations. The 065-1480 provides 18 bays of space for all 065-14xx series Signamax managed media converters in a standard 2U high enclosure. It also includes the 065-1481 Management Module, which communicates with the Signamax 065-14xx series media converters on the chassis’ backplane. It provides full status information on the individual media converter’s ports and allows the advanced management capabilities of the 065-14xx series managed media converters to be switched on or off remotely and individually. Diagnostic testing from a centralized location avoids unnecessary technician dispatch. Alarm traps can be sent to up to five remote IP addresses simultaneously, allowing integration within a variety of Network Management Systems. In-band and out-of-band management are supported by local and remote Telnet console Command Line Interface (CLI), a web browser-based Graphical User Interface (GUI), and a menu-driven interface. Two fully redundant, load-sharing power supplies are standard, to ensure continued availability of the media converters in the event of a power supply failure. Either power supply is hot-swappable and can be taken offline and removed from the unit while the media converters are operating; the media converters themselves are also hot-swappable. The 065-1480 also ships standard with three fully redundant, load-sharing cooling fans to ensure reliable operation. 18-Bay Rack Mount Managed Media Converter Chassis System Spare Individual Fan Assembly for 065-1480

AC-1180 - Signamax Connectivity Systems’ Model 065-1180 Rack Mount Chassis is a carrier or enterprise level rack mounting system designed to accommodate the line of Signamax Ethernet Media Converters. Multi-functional chassis allows the same Media Converter to be used as either a standalone or as a rack mountable component. The system ships standard with two hot-swappable, fully redundant, load-sharing power supplies to ensure continued availability of the media converters in the event of a power supply failure. It also ships with three fully redundant, load-sharing cooling fans as a standard configuration. The Signamax model 065-1180 Rack Mount Chassis is a system worthy of any TELCO or Interexchange Carrier installation. It is easy to maintain, easy to service, and absorbs substantial abuse without failure. 8-Bay Rack Mount Media Converter Chassis Spare Redundant Power Supply 90 - 240 V AC

AC-1185 - The Signamax 065-1185 16-Bay Rack Mount Media Converter Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure. High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime. The 065-1185 has a choice of power supply configurations, supporting AC power for 110 volt or 220 volt power systems or -48 volt DC power for carrier operations. 16-Bay Rack Mount Media Converter Chassis Spare Redundant Power Supply 90 - 240 V AC

DC-1180 - Signamax Connectivity Systems’ Model 065-1180 Rack Mount Chassis is a carrier or enterprise level rack mounting system designed to accommodate the line of Signamax Ethernet Media Converters. Multi-functional chassis allows the same Media Converter to be used as either a standalone or as a rack mountable component. The system ships standard with two hot-swappable, fully redundant, load-sharing power supplies to ensure continued availability of the media converters in the event of a power supply failure. It also ships with three fully redundant, load-sharing cooling fans as a standard configuration. The Signamax model 065-1180 Rack Mount Chassis is a system worthy of any TELCO or Interexchange Carrier installation. It is easy to maintain, easy to service, and absorbs substantial abuse without failure. 8-Bay Rack Mount Media Converter Chassis Spare Redundant Power Supply 48 V DC

DC-1185 - The Signamax 065-1185 16-Bay Rack Mount Media Converter Chassis provides higher rack mount media converter density for large installations that can accommodate rear access to the chassis for power supply maintenance. The 065-1185 provides 16 bays of space for all 065-11xx series Signamax media converters in a standard two rack unit high enclosure. High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime. The 065-1185 has a choice of power supply configurations, supporting AC power for 110 volt or 220 volt power systems or -48 volt DC power for carrier operations. 16-Bay Rack Mount Media Converter Chassis Spare Redundant Power Supply 48 V DC

IndustrialPartner.com
301 S Sherman Street
Richardson, Texas 75081
United States
1-972-234-4343
info@industrialpartner.com
©2006 IndustrialPartner.com