Transition Networks Networking & Communication

You are here: IndustrialPartner.com / Enterprise Networking / Networking & Communication / Transition Networks

Transition Networks

Choose a product:

E-CX-MC30 - Ethernet Coax Transceivers Port 1: 10BASE5 (AUI) Port 2: 10BASE2 (BNC) Cut the cost of Ethernet cabling with a 10BASE2 coaxial transceiver that's so compact (just 2.75" x 1.75" x 0.75") you can connect it directly to the workstation or AUI drop cable. And the unit requires no external power supply.

E-FL-HB-040X - Ethernet 4 and 8-port Fiber Hubs 4-port 10BASE-FL multimode fiber (ST) hub Designed to support anything from a workgroup to an entire network. 4 and 8 10BASE-FL port models can be cascaded for extended LAN topologies. Link Pass Through Optional AUI port provides connectivity to existing backbone. Alphanumeric display and advanced diagnostics simplify hub configuration, status monitoring and troubleshooting.

E-FL-HB-080X - Ethernet 4 and 8-port Fiber Hubs 8-port 10BASE-FL multimode fiber (ST) hub Designed to support anything from a workgroup to an entire network. 4 and 8 10BASE-FL port models can be cascaded for extended LAN topologies. Link Pass Through Optional AUI port provides connectivity to existing backbone. Alphanumeric display and advanced diagnostics simplify hub configuration, status monitoring and troubleshooting.

E-FRL-MC05 - Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 850nm MM ST (2 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber

E-FRL-MC05(L) - Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 1300nm MM ST (5 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber

E-FRL-MC05(SC) - Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 850nm MM SC (2 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Multimode version can support fiber

E-FRL-MC05(SM) - 10BASE-FL Full/Half-Duplex Transceiver Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 1300nm SM ST (20 km) Available in both multimode and single mode fiber optic versions. LinkAlert Technology Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management

E-FX-HB-0800 - 8-port Unmanaged Fast Ethernet Fiber Hub 8-port 100BASE-FX multimode fiber (ST) hub (206 m) Stackable—up to 5 units—with a slot for option module. Front panel LED indicators for power, collision, fault, status, and activity. Incorporate 100Mbps FX multimode fiber into existing UTP environment. Uses standard-based technology that provides ten times the speed and performance of an existing 10Mbps network. Plug and play installation-there are no DIP switches to set or soft

E-FX-HB-0800(SC) - 8-port Unmanaged Fast Ethernet Fiber Hub 8-port 100BASE-FX multimode fiber (SC) hub (206 m) Stackable—up to 5 units—with a slot for option module. Front panel LED indicators for power, collision, fault, status, and activity. Incorporate 100Mbps FX multimode fiber into existing UTP environment. Uses standard-based technology that provides ten times the speed and performance of an existing 10Mbps network. Plug and play installation-there are no DIP switches to set or soft

E-FX-MC01 - Full/Half-Duplex 100BASE-FX Transceiver Port 1: MII Port 2: 100BASE-FX 1300nm MM ST (2 km) Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.) Support fiber optic segments up to 2,000 meters on multimode fiber. Single mode version supports fiber optic segments up to 20,000 meters.

E-FX-MC01(SC) - Full/Half-Duplex 100BASE-FX Transceiver Port 1: MII Port 2: 100BASE-FX 1300nm MM SC (2 km) Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.) Support fiber optic segments up to 2,000 meters on multimode fiber. Single mode version supports fiber optic segments up to 20,000 meters.

E-FX-MC01(SM) - Full/Half-Duplex 100BASE-FX Transceiver Port 1: MII Port 2: 100BASE-FX 1300nm SM SC (20 km) Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.) Support fiber optic segments up to 2,000 meters on multimode fiber. Single mode version supports fiber optic segments up to 20,000 meters.

E-TBT-MC02 - Ethernet 10BASE-T Transceivers Port 1: 10BASE5 (AUI) Port 2: 10BASE-T (RJ-45) Connect AUI (DTE) nodes to a twisted pair medium with Transition's 10BASE-T Transceivers. When you're looking for a quality 10BASE-T transceiver, look no further than the MC02.

E-TX-MC01 - Full/Half-Duplex 100BASE-TX Transceiver Port 1: MII Port 2: 100BASE-TX (RJ-45) Supports 100BASE-TX segments up to 330 feet over Fast Ethernet. Connects MII nodes via a RJ-45 connector to a 100BASE-TX medium in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet. The RJ-45 ports have the ability to auto-negotiate: either UTP port may connect to any Ethernet or Fast Ethernet compli

MA-FSC - 100BASE-FX multimode adapter (SC)

MA-FST - 100BASE-FX multimode adapter (ST)

MA-TX - 100BASE-TX adapter RJ-45

MAOB - BNC adapter card for 10BASE-FL fiber hubs

MAOF - (ST) fiber adapter card for 10BASE-FL fiber hubs

N-FX-MT-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (MT-RJ) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsof

N-FX-SC-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (SC) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsoft

N-FX-ST-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (ST) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsoft

ND-FX-MT-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (MT-RJ) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsof

ND-FX-SC-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (SC) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsoft

ND-FX-ST-01 - Fiber Network Interface Cards 100BASE-FX 1300nm multimode (ST) (2 km) LED status indicator monitor link status, activity, collisions, full and half-duplex Supported by the latest drivers for a wide variety of operating systems including (Windows 3.X, 9X & NT, Novell, Banyan, Solaris, Linux and UNIX) and supports most popular LAN protocols. Supported for Desktop Management Task Force (DMTF) DMI 2.0 specification and PermaNet for network servers running Novell Netware or Microsoft

PSIII-1/7-45 - PowerStar™ III AS400 7-port Active UTP Repeater (1) RJ-45 port for host connection (7) RJ-45 ports for device connections Provides true start sequence regeneration and line synchronization. Each port has separate transceiver circuitry and is isolated from the other ports, so disconnecting or removing one device does not affect the other devices. Automatically compensates for speed differences among 5250 devices. Host and device connections use RJ-45 connectors. Use

PSIV-2/14-45 - PowerStar IV AS400 14-port Active UTP Repeater AND PowerStar™ V 5250 Express 14-port Active UTP Repeater (2) RJ-45 ports for host connection (14)RJ-45 ports for device conections (1) slot for optional twinax or fiber adapter card Connects two hosts and 14 devices in a star configuration via twisted pair cable at a total distance of up to 1520 meters (5,000 feet) from the host. Provides true start sequence regeneration and line synchronization. Each port has separate tran

PSM-8E - PowerStar™ Express Mux 5250 Express 8-port Multiplexer / Demultiplexer (8) RJ-45 ports for device connections (1) DB-25 for host connection (1) Fiber Optic (ST) IBM® 5250 Express capable. Compatible with PowerStar III, PowerStar IV and PowerStar V active star repeaters. (It will operate at 2Mbps 5250 Express speed when used with the PowerStar V.) Increase your data integrity with true start sequence regeneration and line synchronization. Simplify your media connections by