You are here: IndustrialPartner.com / Industrial Automation & Controls / Industrial Automation & Control / Condor Engineering

Condor Engineering
Manufactures, markets and support of high-quality, cost-effective, data communications solutions for avionics. Our product portfolio includes test, simulation and production interfaces for Commercial (ARINC, AFDX, CSDB) and Military (MIL-STD-1553, MMSI) avionics databuses.


Choose a product:

CEI-500 - Modular avionics interface for PCI

CEI-500-4 - Full length PCI card with 4 IP Module slots (50 pin headers)

CEI-500-7 - Half length PCI card with 3 IP Module slots (50 pin headers)

CEI-500-9 - Full length PCI card with 5 IP Module slots (50 pin headers)

CEI-500-A - 3/4 length PCI card with 1 PMC slot

CEI-520/520A - Intelligent ARINC interface for PCI

CEI-520/CEI-520A - ARINC Interface for PCI

CEI-520A-0816 - ARINC 429 Intelligent PCI interface with 16 Rx, 8 Tx channels, 16 input, 16 output discretes

CEI-520A-1208-C - Intelligent PCI card with 12 Rx, 8 Tx ARINC 429 channels, 4 Rx and 4 Tx CSDB channels, 16 input, 16 output discretes, parametrics

CEI-520A-1508-J - Intelligent PCI card with 15 Rx, 8 Tx ARINC 429 channels, 1 Rx and 1 Tx Dual Mode ARINC 717 channels, 16 input, 16 output discretes, parametrics

CEI-520A-1514-J - Intelligent PCI card with 15 Rx, 14 Tx ARINC 429 channels, 1 Rx and 1 Tx Dual Mode ARINC 717 channels, 16 input, 16 output discretes, parametrics

CEI-520A-1608 - ARINC 429 Intelligent PCI interface with 16 Rx, 8 Tx channels, 16 input, 16 output discretes

CEI-520A-1616 - ARINC 429 Intelligent PCI interface with 16 Rx, 16 Tx channels, 16 input, 16 output discretes

CEI-520A-1616-P - ARINC 429 Intelligent PCI interface with 16 Rx, 16 Tx channels, 16 input, 16 output discretes, parametrics

CEI-520A-22 - ARINC 429 Intelligent PCI interface with 2 Rx, 2 Tx channels

CEI-520A-44 - ARINC 429 Intelligent PCI interface with 4 Rx, 4 Tx channels, 8 input, 8 output discretes

CEI-520A-88 - ARINC 429 Intelligent PCI interface with 8 Rx, 8 Tx channels, 8 input, 8 output discretes

CEI-520A-88-P - ARINC 429 Intelligent PCI interface with 8 Rx, 8 Tx channels, 8 input, 8 output discretes, parametrics

CEI-620 - Interface ARINC interface for CompactPCI

CEI-620-0816 - ARINC 429 Intelligent 3U CompactPCI card with 8 Rx, 16 Tx channels, 16 In/16 Out discretes

CEI-620-1508-J - Intelligent 3U CompactPCI card with 15 Rx, 8 Tx ARINC 429 channels, and 1 Rx, 1 Tx Dual-Mode (either HBP or BPRZ) ARINC 717 channels

CEI-620-1514-J - Intelligent 3U CompactPCI card with 15 Rx, 14 Tx ARINC 429 channels, and 1 Rx, 1 Tx Dual-Mode (either HBP or BPRZ) ARINC 717 channels

CEI-620-1608 - ARINC 429 Intelligent 3U CompactPCI card with 16 Rx, 8 Tx channels, 16 In/16 Out discretes

CEI-620-1616 - ARINC 429 Intelligent 3U CompactPCI card with 16 Rx, 16 Tx channels, 16 In/16 Out discretes

CEI-620-22 - ARINC 429 Intelligent 3U CompactPCI card with 2 Rx, 2 Tx channels

CEI-620-44 - ARINC 429 Intelligent 3U CompactPCI card with 4 Rx, 4 Tx channels, 8 In/8 Out discretes

CEI-620-88 - ARINC 429 Intelligent 3U CompactPCI card with 8 Rx, 8 Tx channels, 8 In/8 Out discretes

CNIC-2P - Dual port 10/100 full duplex PMC module for AFDX / ARINC 664 support

CNIC-2P3 - Dual port 10/100 full duplex 3U CompactPCI card (PMC on carrier) for AFDX / ARINC 664support

CNIC-2P3/F - Dual port 10/100 full duplex 3U CompactPCI card (PMC on carrier) for ARINC 664/AFDX support

CNIC-2PF - Dual port 10/100 full duplex 6U CompactPCI card (PMC on carrier) for AFDX / ARINC 664 support

CNIC-2PX - Dual port 10/100 full duplex PCI card (PMC on carrier) for AFDX / ARINC 664 support

CONA615-1 - 10 foot cable transitions from the card edge connector on the CEI-715 to an ARINC 615 Airborne Computer Connector (MS27473T-18A-53P). Includes a strain-relief clip.

CONA615-2 - A 12" cable transitions from an ARINC 615 Data Loader Cable Connector (JT01RE-18A-53S) to an ARINC 603 Airborne Computer Connector (MS24266R-18B-31P)

CONA615-3 - A 12" cable transitions from an ARINC 615 Data Loader Cable Connector JT01RE-18A-53S to a CMU-900 Connector DB25 Female

CONC1553-1 - Transitions from a Champ 50 connector on the front panel to two 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.

CONCEI-220 - 20" ribbon cable transitions from the rear (P4) connector on the CEI-220 to a 37 pin D-sub male connector mounted on a PC expansion card end-panel.

CONCEI-520 - 36" cable (with twisted pairs) transitions from the card end (P2) connector on the CEI-520/520A or CEI-830 to pigtail ends. This cable is for ARINC signals only.

CONCEI-620 - 36" cable (with twisted pairs) transitions from a card end connector (P1 or P2) on the CEI-620 or CEI-820 to a 50 pin D-sub male connector

CONCEI-710 - 12" cable (with twisted pairs) transitions from a card edge connector (P2 or P3) on the CEI-710 to a 15 pin D-sub female connector.

CONCEI-715 - A 30" cable (with twisted pairs) transitions from the card edge connector on the CEI-715 to a 37 pin D-sub with socket/female contacts.

CONCEI520-P10 - 10 foot cable (with twisted pairs) transitions from the card end (P2) connector on the CEI-520/520A or CEI-830 to pigtail ends. This cable is for ARINC signals only

COND25-1553 - Transitions from a 25 pin D-sub connector on a PC expansion card end-panel to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.

CONM50-D25-1 - An 18" ribbon cable transitions from individual IP Module ribbon connectors on the ISA (PC/AT) carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.

CONM50-D25-2 - An 18" ribbon cable transitions from individual IP Module ribbon connectors on the PCI carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.

CONM50-D37 - A 15" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. The end-panel is easily removed from the D-sub connector. Also can be used for CEI-520/520A I/O discretes (P3).

CONM50-D37-30 - A 30" ribbon cable transitions from individual IP modules on various carrier boards to a 37 pin D-sub female connector mounted on a PC expansion card end-panel. This allows external connection to pins 1-37 on an individual IP Module. The end-panel is easily removed from the D-sub connector. Also can be used for CEI-520/520A I/O discretes (P3).

CONP1553-1 - Transitions from each card end (non-IRIG) connector on various boards into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 8" cables with BNC cable jacks for I/O triggers.

CONPCCARD-1 - Transitions from the PCCARD-1553 card edge connector into two 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.

CONPCCD-1 - Transitions from the PCC-D1553 card edge connector into two 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.

CONPCCD-2 - Transitions from the PCC-D1553 card edge connector into four 36" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers.

CONPMC-D-1 - Transitions from a SCSI-68 pin connector to CJ70 Twinax, 3 lug, 1553 cable jack ends for 8 MMSI channels plus monitor cable.

CONQPMC-1 - Transitions from a SCSI-68 pin connector to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.

CONQPMC-2 - Transitions from a SCSI-68 pin connector to four CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.

CONQPMC-4 - Transitions from a SCSI-68 pin connector to eight CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O.

CONV1553-3 - An 18" cable assembly transitions from individual IP Module ribbon connectors on: VME and VXI front panels (or internal VME-AIC connectors) to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.

CONV1553-4 - Transitions from each SCSI-2 connector on a VME, VXI or CEI-600-6 front panel to two 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.

CONV1553-5 - An 18" cable assembly transitions from an IP-708 Module ribbon connector on the VXI-AIC to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends.

CONV1553-6 - Two channels of dual-redundant 1553. Transitions from each SCSI-2 connector on a VME, VXI or CEI-600-6 front panel to four 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and D-Sub 9 pin connector for additional I/O.

CONW1553-1 - Transitions from a card end connector (with IRIG) on the QVME-1553 or QVXI-1553X into two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and four 8" cables with BNC cable jacks for I/O triggers and IRIG Rec/Gen.

PCI-1553 - MIL-STD-1553A/B PCI Bus Interfaces

PCI-1553-M - MIL-STD-1553 multi-function, single channel PCI interface board

PCI-1553-MM - MIL-STD-1553 multi-function, two channel PCI interface board

PCI-1553-S - MIL-STD-1553 single-function, single channel PCI interface board

PCI-1553-SS - MIL-STD-1553 single-function, two channel PCI interface board

Q104-1553 - Q104-1553 Mating Connector used by customer in building their cable

QCP-1553 - Multi or single-function, one, two or four independent channel MIL-STD-1553 interface for CompactPCI

QPCI-1553 - High Density PCI Interface

QPCI-1553-1MW - MIL-STD-1553B multi-function, single channel PCI interface; variable voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)

QPCI-1553-1SAW - MIL-STD-1553B single-function, single channel PCI interface; fixed voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)

QPCI-1553-2MW - MIL-STD-1553B multi-function, two channel PCI interface; variable voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)

QPCI-1553-2SAW - MIL-STD-1553B single-function, two channel PCI interface; fixed voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)

QPCI-1553-4MW - MIL-STD-1553B multi-function, four channel PCI interface; variable voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)

QPCI-1553-4SAW - MIL-STD-1553B single-function, four channel PCI interface; fixed voltage; IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL)