You are here: IndustrialPartner.com / Industrial Automation & Controls / Industrial Automation & Control / Equustek Solutions
Equustek Solutions
Choose a product:
DL2000-ASM - Interfaces Serial ASCII devices (Scanners/Printers) to A-B's DH+ protocolDL2000-CMX - Interfaces Modbus Master or Slave devices to A-B's DH+
DL2000-INV2 - Interfaces up to 31 Toshiba G2 and G3 inverters to A-B DH+, RIO and Modbus.
DL2000-KFX - Allows DF1 serial equipment to communicate over Allen Bradleys DH+
DL2000-PML - Interfaces up to 10 Power Measurements 3720 ACM meters to A-B RIO.
DL2000-RAS - Interfaces Serial ASCII outputting devices (Scanners) to A-B's RI/O protocol
DL2000-SCIPU - Interfaces up to 31 Siemens VS/VF drives to A-B DH+, RIO and Modbus.
DL3000-ENI - Ethernet/IP and DH+. DataLink's gateway package interfaces your Ethernet/IP and Data Highway Plus networks, extending the life of Allen-Bradley PLC-5s. The DataLink solution allows applications such as RSLogix, RSLinx, and RSView to access devices on a DH+ network from an Ethernet/IP LAN, enabling users to run MMI applications or program and monitor PLCs on a DH+ network from an Ethernet LAN station.
DL3000-KFX - DF1 to DH+
DL3500-Ascii/DH+ - DL3500 - RS232/422/485 and USB Interface to A-B's DH+ or DH-485. Interfaces Serial ASCII devices (Scanners/Printers) to A-B's DH+ or DH-485 network.
DL3500-Ascii/DH-485 - DL3500 - RS232/422/485 and USB Interface to A-B's DH+ or DH-485. Interfaces Serial ASCII devices (Scanners/Printers) to A-B's DH+ or DH-485 network.
DL3500-DF1/DH+ - Allows DF1 serial equipment to communicate over Allen Bradleys DH+ network
DL3500-DF1/DH-485 - Allows DF1 serial equipment to communicate over Allen Bradleys DH-485 network
DL3500-DH+ - Lightweight, Din Rail Mounted, DC or USB Powered lower cost alternative to A-B's 1770-KF2 for DH+ or 1770-KF3 for DH-485. Current Protcols are A-B DF1, Modicon Modbus, and serial ASCII. The DL3500 can be easily customized to allow any serial protocol access to A-B's DH+ or DH-485.
DL3500-DH-485 - Lightweight, Din Rail Mounted, DC or USB Powered lower cost alternative to A-B's 1770-KF2 for DH+ or 1770-KF3 for DH-485. Current Protcols are A-B DF1, Modicon Modbus, and serial ASCII. The DL3500 can be easily customized to allow any serial protocol access to A-B's DH+ or DH-485.
DL3500-Modbus/DH+ - Interfaces Modbus Master or Slave devices to A-B's DH+ network
DL3500-Modbus/DH-485 - Interfaces Modbus Master or Slave devices to A-B's DH-485 network
DL3500-SLC5/04 Bridge - gives DF1 serial drivers (RSLINX) a DH+ interface for your DH-485 device connected to the CH0 of a SLC 5/04; bridges DH+ to DH-485 using the SLC 5/04 with DH-485 Pass Thru enabled
DL4000-DAS - Interfaces Serial ASCII devices (Scanners/Printers) to A-B's DF1 protocol
DL4000-DFX - allows three DF1 serial devices to simultaneously communicate with each other
DL4000-DMX - Interfaces Modbus Master or Slave devices to A-B's DF1 protocol
DL4000-MAS - Interfaces an ASCII Floating Point format number devices to a Modbus Slave RTU
DL4000-MMX - Allows Modbus RTU devices to communicate with multiple Modbus ASCII devices
DL4000-PM - Provides a DF1 Half Duplex Master interface to A-B's Power Monitor 3000 then sends the converted data via Modbus to a specified Slave RTU devices
DL4500-EDH+ - Allows DF1 serial drivers to communicate over Allen Bradleys DH+ network via TCP/IP protocol
DL4500-EDH-485 - Allows DF1 serial drivers to communicate over Allen Bradleys DH-485 network via TCP/IP protocol
DL4500-MEDH+ - Allows Modbus TCP drivers to communicate to devices on Allen Bradleys DH+
DL4500-MEDH-485 - allows Modbus TCP drivers to communicate to devices on Allen Bradleys DH-485