You are here: IndustrialPartner.com / Industrial Automation & Controls / Industrial Automation & Control / Kepware
Kepware
Choose a product:
53MC1000 -53MC2002 -
53MC4000 -
53MC5000 -
6B11 - Analog Input Modules
6B12 - Analog Input Modules
6B13 - Analog Input Modules
6B21 - Analog Output Modules
6B50 - Digital I/O modules
A-B Bulletin 900-TC16 -
A-B Bulletin 900-TC32 -
A-B Bulletin 900-TC8 -
A61PEU -
A62PEU -
CNV-BA485-DI25 - The SeaLevel Systems DIN485+I isolated interface converter allows a standard RS-232 port to communicate with an individual RS-422 device or with multiple devices within an RS-485 network. Support is provided for RS-422 full duplex mode as well as RS-485 full or half duplex master and slave modes. Autobaud, Send Data, and RTS modes are supported, offering maximum flexibility to all of your application requirements. Connection to external devices is provided by a six position screw terminal block.
CNV-BA485-DN25 - The SeaLevel Systems DIN485+ DIN rail mountable interface converter allows a standard RS-232 port to communicate with an individual RS-422 device or with multiple devices within an RS-485 network. Support is provided for RS-422 full duplex mode as well as RS-485 full or half duplex master and slave modes. Autobaud, Send Data, and RTS modes are supported, offering maximum flexibility to all of your application requirements. Connection to external devices is provided by a six position screw termin
CNV-BA485-SI25 - The SeaLevel Systems IC485+I interface converter provides Isolation and Auto baud capabilities, truly making it a no compromise interface converter. Isolation is important in installations where the equipment connected to the PC is either located far from the host system, or on a different power transformer circuit. Isolation on the IC485+I eliminates the effects of Ground Loop Current, a commonly neglected and misunderstood phenomenon that leads to data errors and the destruction of communicati
CNV-BA485-SN25 - The SeaLevel Systems IC485+ interface converter includes an Auto baud feature and allows a standard RS-232 port to communicate with an individual RS-422 device or with multiple devices within an RS-485 network. The IC485+ supports RS-422 full duplex mode as well as RS-485 full or half duplex master and slave modes. This gives the user flexibility in configuring the device to meet their specific application needs. Onboard LEDs are included to indicate that the device is properly powered and also
CNV-NTLNK-HW00 - Kepware is now offering the NetLink Ethernet Converter Cable for use with Siemens S7 300 and 400 PLCs. NetLink offers an alternative to the CP communication processor. With NetLink you can communicate to your PLC by linking via a switch, Ethernet hub, or directly to the PC using a single network card. NetLink interfaces the PLC via the PROFIBUS interface using Siemens 'MPI' Protocol. The NetLink cable can be used in conjunction with Kepware's Siemens S7 200/300/400 TCP/IP Ethernet OPC Serve
CompactLogix 5300 - Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
CompactLogix 5320 - Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
CompactLogix 5330 - Built-in EtherNet/IP port on processors with E suffix (i.e. 1769-L35E) or via 1761-NET-ENI Series B using Channel 0
ControlLogix 5550 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5553 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5555 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5561 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5562 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
ControlLogix 5563 - via 1756 ENET/ENBT Module or via 1761 NET-ENI
CX-1000 series - using Binary Data-Link Protocol.
D300 Programmable Controller -
D50 Programmable Controller -
DL-05 -
DL-06 -
DL-105 -
DL-230 -
DL-240 -
DL-250 -
DL-260 -
DL-330 -
DL-340 -
DL-430 -
DL-440 -
DL-450 - via an Hx-ECOM module.
Driver Development Program - Driver Development Program. In the rare case we don't offer the driver you desire we may still be able to help by writing the driver for you.
DURAPULSE (GS3) Drive - Drive
DX OPC Plug-in for KEPServerEX - OPC Data Exchange (DX) was designed to address the needs of Device-to-Device and Bus-to-Bus interoperability by applying the same technologies currently used by desktop applications at the device level. By adding OPC DA Client support to an existing OPC DA server we end up with a DX server that not only provides access to its data, but has the ability to gather data from other OPC DA enabled devices.
E151-FB00 - Ethernet I/O modules
E190-8B00 - Ethernet I/O modules
E191-CB00 - Ethernet I/O modules
E200-FB00 - Ethernet I/O modules
E201-8B00 - Ethernet I/O modules
E250-FB00 - Ethernet I/O modules
E290-FB00 - Ethernet I/O modules
E300-FB00 - Ethernet I/O modules
FA2 -
FA2J -
FA3S-CP11 -
FA3S-CP12 -
FANUC Power Mate i - Model D -
FANUC Power Mate i - Model H -
FANUC Series 15i - Model A -
FANUC Series 16i - Model A -
FANUC Series 18i - Model A -
FANUC Series 21i - Model A -
FlexLogix 5400 - via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FlexLogix 5433 - via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FlexLogix 5434 - via 1788-ENBT Ethernet Daughtercard or via 1761-NET-ENI Series B using Channel 0
FP0 - via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FP1 C16 - via MEWTOCOL-COM
FP1 C24 - via MEWTOCOL-COM
FP1 C40 - via MEWTOCOL-COM
FP10SH - via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FP3 - via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
FPM - via ET-LAN UDP or TCP Will support any FP series PLC with optional ET-LAN Ethernet unit.
GS1 - Drive
GS2 - Drive
H2-EBC -
H2-EBC-F -
H4-EBC -
H4-EBC-F - Use NetEdit to manually configure modules to base.
HC900 Hybrid Controller -
Honeywell UDC 3000 -
Honeywell UDC 3300 -
Horner OCS - (Horner's Operator Control Stations)
IA Super SEL Controllers (Type E -
IOtech PointScan 200 modules - connected through a PointScan 100 module.
iSNMP OPC Server - iSNMP Suite provides operators with a real time view of the health of their Ethernet network devices, the overall Ethernet network traffic volume and overall Ethernet network status from within their HMI software environment.
KEPServerEX OPC Server - Kepware's KEPServerEX is the leading OPC Server providing unsurpassed industrial connectivity with over 80 downloadable device drivers that support 100's of model types.
LinkMaster - LinkMaster has the capabilities of both a "server" and "client" applications, allowing it to access, collect, organize, and link data from other OPC servers and offer that data to any OPC/DDE client.
M-Cut - utilize the 8-byte protocol
M-Drive - utilize the 8-byte protocol
M-Rotary - utilize the 8-byte protocol
M-Shuttle - utilize the 8-byte protocol
M-Track - utilize the 8-byte protocol
M-Trim - utilize the 8-byte protocol
M151-FB00 - RS-485 I/O connected through and Ethernet I/O module.
M181-4B00 - RS-485 I/O connected through and Ethernet I/O module.
M190-8B00 - RS-485 I/O connected through and Ethernet I/O module.
M200-FB00 - RS-485 I/O connected through and Ethernet I/O module.
M250-8B00 - RS-485 I/O connected through and Ethernet I/O module.
M290-FB00 - RS-485 I/O connected through and Ethernet I/O module.
M300-8B00 - RS-485 I/O connected through and Ethernet I/O module.
MC4-Injection Moulding Machine - Simultaneous device connections are not allowed.
Micro1 -
Micro3 -
MicroLogix 1000 - via 1761-NET-ENI
MicroLogix 1200 - via 1761-NET-ENI
MicroLogix 1500 - via 1761-NET-ENI
ML-Drive - utilize the 8-byte protocol
ML-Trim - utilize the 8-byte protocol
NB0 -
NB1 -
NB2 -
NB3 -
NJ -
NS -
NSX-DR232-DR01 - The Digi One IA delivers efficient serial-to-Ethernet connectivity and is ideal for applications where TCP Socket, UDP Socket, or UDP multicast functionality is needed. The Digi One IA terminal server allows any industrial device with a serial port to be connected to Ethernet. Digi One IA delivers cost-effective performance and capability in a rugged DIN Rail mountable enclosure specifically designed for the Industrial Automation market.
NSX-DR232-TM01 - The Digi One SP delivers efficient serial-to-Ethernet connectivity and is ideal for applications where TCP Socket, UDP Socket, or UDP multicast functionality is needed. The Digi One SP device server easily allows any device with a serial port to be connected to Ethernet. The compact design of the Digi One SP delivers cost-effective performance and capability in one of the smallest form factors available.
OPC Product Training - OPC Product Training. Kepware now offers a training program to help our customers become familiar and at ease when using our OPC software.
OPC-ABBL9-NA00 - Allen-Bradley Bulletin 900 OPC Server Supported devices: TC8 TC16 TC32
OPC-ABSTE-NA00 - Allen Bradley ControlLogix OPC Server Supported devices: ControlLogix 5550 ControlLogix 5555 ControlLogix 5553 ControlLogix 5561 ControlLogix 5562 ControlLogix 5563 CompactLogix 5300 CompactLogix 5320 CompactLogix 5330 SoftLogix 5800 FlexLogix 5400 FlexLogix 5433 FlexLogix 5434 PLC 5 Control Net PLC 5/10 PLC 5/15 PLC 5/20 PLC 5/20C PLC 5/25 PLC 5/30 PLC 5/40 PLC 5/40C PLC 5/60 PLC 5/80 PLC 5/80C SLC 500 Fixed I/O Processor SLC 5/01 Modular I
OPC-AD6BS-NA00 - Analog Devices OPC Server Supported devices: 6B11 Analog Input 6B12 Analog Input 6B13 Analog Input 6B21 Analog Output 6B50 Digital I/O
OPC-ADEBC-NA00 - AutomationDirect / Koyo EBC OPC Server AutomationDirect EBC OPC Server Supported devices: H2 EBC or EBC-F H4 EBC or EBC-F Terminator I/O GS1 Drive GS2 Drive DURAPULSE (GS3) Drive
OPC-ARMCL-NA00 - Aromat/Matsushita/NAIS Ethernet Link OPC Server Supported devices: 6B11 Analog Input 6B12 Analog Input 6B13 Analog Input 6B21 Analog Output 6B50 Digital I/O
OPC-ATDRT-NA00 - AutomationDirect ECOM OPC Server Supported devices: DL-05 DL-06 DL-230 DL-240 DL-250 DL-260 DL-430 DL-440 DL-450
OPC-BUSWR-NA00 - BUSWARE Ethernet I/O OPC Server Supported devices: E200-FB00 E201-8B00 E290-FB00 E151-FB00 E190-8B00 E250-FB00 E300-FB00 E191-CB00 M200-FB00 M290-FB00 M151-FB00 M190-8B00 M181-4B00 M250-8B00 M300-8B00
OPC-CTFCX-NA00 - Contrex Serial OPC Server Supported devices: CX-1000 series
OPC-CTFMS-NA00 - Contrex M-Series OPC Server Supported devices: M-Cut M-Drive M-Rotary M-Shuttle M-Track M-Traverse M-Trim ML-Drive ML-Trim
OPC-CTRHM-NA00 - Cutler-Hammer OPC Server Supported devices: M-Cut M-Drive M-Rotary M-Shuttle M-Track M-Traverse M-Trim ML-Drive ML-Trim
OPC-DDECC-NA00 - DDE Client Driver Supported device: Can be used with any DDE server that supports standard Microsoft DDE
OPC-DFILX-NA00 - Dataforth isoLynx OPC Server Supported device: SLX100
OPC-DXPLG-NA00 - OPC DX Plug-in for KEPServerEX OPC technology has been extremely successful at bridging the vertical communication gap between the plant floor and the control room. Using standards such as OPC Data Access (DA), hundreds of software applications have been written to gather data from a wide range of control systems using this simple Client/Server architecture. OPC DA did not, however, address the needs of integration and interoperability directly between devices. Historically there have been a number of high-level and low-level bus protocols, each one written to address the differing needs and uses of the devices they were intended to serve. Protocols such as PROFIBUS, DeviceNet, ControlNet, and many more, have been utilized in the past. Recently there has been a growing movement towards the use of Ethernet as an industrial communication backbone. Initially each of these respective bus specifications was redeveloped for use over Ethernet. The resulting PROFInet, Ethernet/IP, High-Speed Ethernet Fieldbus (HSE), and BACNET/IP provided a means for customers to move smoothly from their proprietary wiring schemes to Ethernet. However it didn’t address the key issue of true Device-to-Device interoperability or more importantly Bus-to-Bus interoperability. While these new Ethernet based protocols could coexist on the same wire, there was still no way to get data from a PROFInet device directly into an Ethernet/IP device.
OPC-FPMDC-NA00 - Micro-DCI OPC Server Supported devices: 53MC1000 53MC2000 53MC2002 53MC4000 53MC5000
OPC-FUJFX-NA00 - Fuji Flex OPC Server Fuji Flex OPC Server Supported devices: Flex-PC N Series Open Flex-PC NB0 Flex-PC NB1 Flex-PC NB2 Flex-PC NB3 Flex-PC NBJ Flex-PC NBS
OPC-GEFCS-NA00 - GE Focas1 OPC Server Supported devices: Series 15i - Model A Series 16i - Model A Series 18i - Model A Series 21i - Model A Power Mate i - Model D Power Mate i - Model H
OPC-GEFNC-NA00 - GE CCM OPC Server Supported device: 9030-311 9030-313 9030-331 9030-341 9070-731 9070-732 9070-771 9070-772 9070-781 9070-782 Series Five Series Six
OPC-HYSTE-NA00 - Honeywell UDC OPC Server Supported devices: Honeywell UDC 3000 Honeywell UDC 3300 (MODB3K mode)
OPC-IASEL-NA00 - IA Super SEL OPC Server IA Super SEL OPC Server Supported devices: Super SEL (Type E and G) X - SEL
OPC-IDCCL-NA00 - Idec Computer Link OPC Server Supported devices: Micro1 Micro3 MicroSmart OpenNet Controller Fa2 Fa2j Fa3s-cp11 Fa3s-cp12
OPC-IOTPS-NA00 - IOtech PointScan OPC Server IOtech PointScan 100 OPC Server Supported devices: IOtech PointScan 100 modules IOtech PointScan 200 modules via 100 module
OPC-ISNMP-NA0X - iSNMP OPC Server IndustrialSNMP (iSNMP) Suite is the original network management and analysis software developed specifically for the industrial controls marketplace. iSNMP Suite seamlessly integrates monitoring and analyzing of managed and unmanaged Ethernet networks into the leading human-machine interface (HMI) software Packages. iSNMP Suite provides operators with a real time view of the health of their Ethernet network devices, the overall Ethernet network traffic volume and overall Ethernet network status from within their HMI software environment. iSNMP Suite also has the ability to analyze the raw data and issue warnings to you about the operating condition of your network. iSNMP Suite is an OPC 2.0 Server that can interface with any OPC client software.
OPC-KRMFE-NA00 - Krauss Maffei MC4 Ethernet OPC Server Krauss-Maffei MC4 Ethernet Supported devices: MC4-Injection Molding Machine
OPC-LNKMS-NA00 - LinkMaster LinkMaster has the capabilities of both a “server” and a “client” application, allowing it to access, collect, organize, and link data from multiple OPC servers. Additionally, LinkMaster is an OPC and DDE server allowing it to act as a bridge between legacy DDE systems and new OPC enabled applications. The principal goal of LinkMaster is to allow you to easily link data from multiple data sources thus providing you with a simple means of integrating systems from multiple vendors into a single operational solution. Using simple drag and drop configuration, LinkMaster projects can be quickly constructed that allow you to move thousands of key process values between any OPC servers you choose to connect with. LinkMaster is a fast and robust Windows application that requires no programming knowledge, simply “Drag and Drop” to create your links. Built-in scaling, user-access manager, error tracking, and write optimization capabilities, provide total control of your data flow and application access
OPC-MDBUS-NA00 - Mitsubishi OPC Servers Modbus ASCII Serial OPC Server Supported devices: Modbus ASCII Flow Computers Flow Automation
OPC-MITAE-NA00 - Mitsubishi OPC Servers Supported devices: All A Series and Q series PLCs
OPC-MITAS-NA00 - Mitsubishi A Series OPC Server Supported devices: All A Series PLCs
OPC-MITFN-NA00 - Mitsubishi OPC Servers Mitsubishi FX Net OPC Server Supported devices: FX FX2C FX0N FX2N
OPC-MITFX-NA00 - Mitsubishi OPC Servers Mitsubishi FX OPC Server Supported Devices FX FX0 FX0N FX2N
OPC-ODBCI-NA00 - ODBC Client Driver ODBC Client Driver Supported devices: Microsoft Access Microsoft SQL Oracle Sybase The ODBC Client Driver is capable of communicating with any application that supports the standard "ODBC" data source format. Required: MDAC - Microsoft Data Access Components (it consists of several core components that provide various database technologies; including ODBC and its drivers.
OPC-OMRNF-NA00 - ODBC Client Driver Omron Fins Ethernet OPC Server Supported devices: C200H C200HE C200HE-Z C200H-Z C200HG C200HG-Z C200HS C200HX C200HX-Z C500 C1000 C1000H C2000 C2000H CV500 CV1000 CV2000 CVM1-CPU01 v2 CVM1-CPU11 v2 CVM1-CPU21 v2 CS1
OPC-OPTLG-NA00 - Optimation OptiLogic OPC Server Optimation OptiLogic OPC Server Supported devices: OL4054 OL4058 OL2208 OL2211 OL2201 OL2108 OL2109 OL2111 OL2408 OL2418 OL2252 OL3406 OL3420 OL3440 OL3850
OPC-PHLPS-NA00 - Philips OPC Server Philips P8/PC20 OPC Server Supported devices: Philips P8 MC30 (using the CI30 card) MC31 MC41 ISCOS 10 ISCOS 60 ISCOS 70 Philips PC20
OPC-PTLWA-NA00 - Partlow ASCII OPC Server Partlow ASCII OPC Server Supported devices: MIC 1160 MIC 1161 MIC 1400 MIC 1401 MIC 1460 MIC 1800 MIC 1801 MIC 1810 MIC 2000 MIC 3200 MIC 6000 MRC 7000 MRC 7700 MRC 8000
OPC-SATBE-NA00 - SattBus OPC Servers SattBus Ethernet OPC Server Supported devices: SattCon 200 SC05-25SB
OPC-SCNVE-NA00 - Scanivalve OPC Server Scanivalve Ethernet OPC Server Supported devices: DSA3200 DTS3250
OPC-SIUTW-NA00 - TIWAY OPC Server TIWAY Host Adapter OPC Server Supported devices:
OPC-SIXET-NA00 - SIXNET OPC Server Suite EtherTRAK OPC Server Supported devices: SIXNET EtherTRAK I/O modules (firmware version 2.10 or later) SIXNET RemoteTRAK I/O connected through EtherTRAK I/O module. (Both the RemoteTRAK and EtherTRAK must have firmware version 2.01 or later) SIXNET VersaTRAK RTUs (firmware version 2.12 or later) SIXNET SIXTRAK gateways (firmware version 2.12 or later)
OPC-SM505-NA00 - Siemens OPC Servers Simatic 505 Serial OPC Server Supported devices: TI 520 TI 525 TI 535 TI 545 TI 555 TI 565 TI 575
OPC-SM55E-NA00 - Siemens OPC Servers Simatic 505 Ethernet OPC Server Supported devices: TI 525 via CP2572 and CP2572A Ethernet, TI 545 via CP2572 and CP2572A Ethernet, CP1434-TCP Ethernet interfaces. TI 555 via CP2572 and CP2572A Ethernet, CP1434-TCP Ethernet interfaces. TI 565 via CP2572 and CP2572A Ethernet, CP1434-TCP Ethernet interfaces.
OPC-SMS5A-NA00 - Siemens S5 OPC Server Supported devices: Siemens S5 - 90U Siemens S5 - 95U Siemens S5 - 100U - 100 Siemens S5 - 100U - 101 Siemens S5 - 100U - 103 Siemens S5 - 101U Siemens S5 - 115U - 941 Siemens S5 - 115U - 942 Siemens S5 - 115U - 943 Siemens S5 - 115U - 944 Siemens S5 - 115U - 945 Siemens S5 - 135U - 921 Siemens S5 - 135U - 922 Siemens S5 - 135U - 928 Siemens S5 - 155U - 946 Siemens S5 - 155U - 947
OPC-SMS5R-NA00 - Siemens OPC Servers Siemens S5 3964R OPC Server Supported devices: 115U - 941 115U - 942 115U - 943 115U - 944 115U - 945 135U - 921 135U - 922 135U - 928 155U - 946 155U - 947
OPC-SMS7M-NA00 - Siemens OPC Servers Siemens S7 MPI OPC Server Supported devices: Siemens S7-300 Siemens S7-400
OPC-SMS7P-NA00 - Siemens OPC Servers Siemens S7 200 OPC Server Supported devices: S7-212 S7-214 S7-215 S7-216 S7-224
OPC-SQRDS-NA00 - SquareD OPC Server SquareD SY/MAX OPC Server Supported devices: SY/MAX Programmable Controllers SquareD PowerLogic monitors
OPC-THWSV-NA00 - Thermo Westronics OPC Server Suite ThermoWestronics Ethernet OPC Server Supported devices: SV100 SV180 SV180 (2.0)
OPC-TLMUW-NA00 - Telemecanique Uni-Telway OPC Server Uni-Telway OPC Server Supported devices: TSX 07 TSX 17 TSX 37 TSX 47 TSX 57 Small Frame Large Frame
OPC-TSBEN-NA00 - Toshiba OPC Server Suite Toshiba Ethernet OPC Server Supported devices: T2 T3
OPC-TYP3E-NA00 - Toyopuc OPC Servers Toyopuc Ethernet PC3/PC2 OPC Server Supported devices: PC3/PC2 Interchange PC3 Device
OPC-TYPCL-NA00 - Toyopuc OPC Servers Toyopuc PC2 Serial OPC Server Supported devices: PC2 Series or any Computer Link compatible device
OPC-UCNPS-NADL - U-CON Protocol Server: U-CON, the User-Configurable Protocol Server. How often have you needed to get that last piece of data from a bar code scanner, scale, or other industrial device but have been hindered by the lack of a communication driver? Now there is a solution! The U-CON Protocol Server enables you to quickly and easily develop communications drivers for nearly any serial and Ethernet device. The U-CON Protocol Server integrates all of the features and functions that you depend on for your own driver projects. Features such as OPC 1.0 and 2.0 support with tag browsing, automatic tag database generation, DDE support, NT service support, channel diagnostics, and event logging are included. U-CON Protocol Server also supports other features such as modem support, communication port configuration, standard error handling features with configurable retries and timeouts, and OPC diagnostics. Once you develop a communications driver profile, users can make changes to common settings such as se
OPC-UCNPS-NART - U-CON Protocol Server: U-CON, the User-Configurable Protocol Server. How often have you needed to get that last piece of data from a bar code scanner, scale, or other industrial device but have been hindered by the lack of a communication driver? Now there is a solution! The U-CON Protocol Server enables you to quickly and easily develop communications drivers for nearly any serial and Ethernet device. The U-CON Protocol Server integrates all of the features and functions that you depend on for your own driver projects. Features such as OPC 1.0 and 2.0 support with tag browsing, automatic tag database generation, DDE support, NT service support, channel diagnostics, and event logging are included. U-CON Protocol Server also supports other features such as modem support, communication port configuration, standard error handling features with configurable retries and timeouts, and OPC diagnostics. Once you develop a communications driver profile, users can make changes to common settings such as serial port number or device ID without changing the project profile. The U-CON Protocol Server is based upon the same technology found in our Industry leading OPC Server, KEPServerEX. With U-CON you can get all of the benefits of a true multi-threaded 32-bit environment without the need to learn the intricacies of Microsoft Windows development.
OPC-UCOND-NA00 - User-Configurable Driver (U-CON) OPC Server U-CON Device Driver Supported devices: The U-CON driver enables you to quickly and easily develop communications drivers for any serial device or Ethernet device.
OPC-WAGOE-NA00 - Wago OPC Server Wago Ethernet OPC Server Supported devices: 750-342 750-842
OPC-WWINT-NA00 - InTouch Client Driver / OPC Server Supported devices: This driver can import tags defined in an InTouch project. Devices are dependent on the Wonderware InTouch application.
OPC-YKWDE-NA00 - Yokogawa OPC Server Suite Yokogawa CX Ethernet OPC Server Supported devices: CX1006 CX1206 CX2010 CX2020 CX2210 CX2220 CX2410 CX2420 CX2610 CX2620
OPC-YKWME-NA00 - Yaskawa OPC Servers Yaskawa MP Ethernet OPC Server Supported devices: Yaskawa MP 920 Series CPU
OPC-YKWMP-NA00 - Yaskawa OPC Servers Yaskawa Memobus Plus OPC Server Supported devices: Yaskawa Memobus Plus Devices on a Network.
OPC-YKWMX-NA00 - Yokogawa MX OPC Server Yokagawa MX100 Supported devices: MX 100
OpenNet -
PLC 5 Control Net - via 1756 ENET/ENBT Module Gateway to 1756-CNB
PLC 5/10 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/15 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/20 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/20C - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/25 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/30 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/40 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/40C - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/60 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/80 - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
PLC 5/80C - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO
Series 90-30 - with EGD support.
Series 90-30 311 -
Series 90-30 313 -
Series 90-30 331 -
Series 90-30 341 -
Series 90-70 731 -
Series 90-70 732 -
Series 90-70 771 -
Series 90-70 772 -
Series 90-70 781 -
Series 90-70 782 -
Series Six CCM2 - including Expanded I/O
SG Series PLCs -
SL Series PLCs -
SLC 5/01 Modular I/O Processor - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761 NET-ENI
SLC 5/02 Modular I/O Processor - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761 NET-ENI
SLC 5/03 Modular I/O Processor - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761 NET-ENI
SLC 5/04 Modular I/O Processor - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761 NET-ENI
SLC 5/05 Modular I/O Processor - via 1756 ENET/ENBT Module Gateway to 1756-DHRIO or via 1761 NET-ENI
SLC5 Family 1761 NET-ENI to DF1 - via 1761 NET-ENI adapter to Full Duplex DF1
SLX100 - All ISOLYNX SLX100 data acquisition systems that support the ISOLYNX protocol.
SoftLogix 5800 - via EtherNet/IP Messaging Module
U-CON Protocol Server - The U-CON Protocol Server enables you to quickly and easily develop communications drivers for nearly any serial device or Ethernet device. Designed as a driver plug-in, U-CON is completely integrated with Kepware's industry leading OPC server KEPServerEX.
USB-EDG1I-HW00 - Edgeport 1i EIA-422/485 USB-to-serial converters offer an easy Plug and Play solution for COM port expansion. An out-of-the-box (external) alternative to PCI cards, the Edgeport connects via USB to a PC or server, eliminating the need to open the chassis, reconfigure and reboot. Simply plug in the Edgeport and in a matter of minutes gain access to your bar-code scanners, printers, or any serial peripheral device.
USB-EDG4S-HW00 - Edgeport 4s EIA-232/422/485 MEI USB-to-serial converters offer an easy Plug and Play solution for COM port expansion. An out-of-the-box (external) alternative to PCI cards, the Edgeport connects via USB to a PC or server, eliminating the need to open the chassis, reconfigure and reboot. Simply plug in the Edgeport and in a matter of minutes gain up to 4 serial ports using EIA-232/422/485 MEI software selectable port type to connect bar-code scanners, printers, or any serial peripheral device.
USB-EDGE1-HW00 - Edgeport 1 EIA232 USB-to-serial converters offer an easy Plug and Play solution for COM port expansion. An out-of-the-box (external) alternative to PCI cards, the Edgeport connects via USB to a PC or server, eliminating the need to open the chassis, reconfigure and reboot. Simply plug in the Edgeport and in a matter of minutes gain access to your bar-code scanners, printers, or any serial peripheral device.
X-Sel Controllers -