You are here: IndustrialPartner.com / Industrial Computers / Accesories & Peripherals / Bipom Electronics
Bipom Electronics
Choose a product:
CBL-9V - Power jack adapter for 9V Batteries. CBL-9V allows powering MINI-MAX and PRO-MAX Series Microcontroller Boards from a standard 9V Battery.CBL-CAR - Power Jack adapter for Car Cigarette Lighters. CBL-CAR allows powering MINI-MAX and PRO-MAX Series Microcontroller Boards from a automobile or other vehicle.
CNM1-9F9F-6 - NULL modem cable
DAC-1 - DAC-1 is an 8-bit Digital to Analog Converter (DAC) board with I2C 2-wire interface. DAC-1 has 4 analog output channels. All outputs and their corresponding ground returns connect to screw type terminal blocks.
DAC-2 - DAC-2 is an 8-bit Digital to Analog Converter (DAC) boards with I2C 2-wire interface. DAC-2 has 8 analog output channels. All outputs and their corresponding ground returns connect to screw type terminal blocks
DAQ-127 - DAQ-127 is an 8-channel, 12-bit, Analog Input and 1 channel, 10-bit Analog Output peripheral board. DAQ-127 has +/- 10 Volt input range.
DAQ-128 - DAQ-128 is an 8-channel, 12-bit, Analog Input and 1 channel, 10-bit Analog Output peripheral board. DAQ-128 has +/- 4 Volt input range.
DAQ-2543-DA1 - DAQ-2543-DA1 is Analog-To-Digital / Digital-To-Analog peripheral board with TLC2543, 11-channel, 12-bit Analog-To-Digital Converter and 10-bit analog output from Texas Instruments. All the channels are available on terminal blocks
DIO-1 - DIO-1 is an expander board with 8 open/collector outputs ( each capable of 400mA ) and 12 TTL/CMOS inputs/outputs. A PIC16C62 micro-controller on this board acts as a I2C 2-wire slave device to control inputs and outputs. DIO-1 can also be used as a standalone PIC micro-controller board.
EXPCABLE-18 - 18 inch ( 45.7 cm. ) cable assembly with female connectors on each end. It connects MINI-MAX based boards to peripheral boards
EXPCABLE-6 - 6 inch ( 15.2 cm. ) cable assembly with female connectors on each end. It connects MINI-MAX based boards to peripheral boards
EXPCABLE-BR1 - 6" cable that connects the expansion connectors of our microcontroller boards to a standard Breadboard for ease of prototyping
KP1-3X4 - 3 columns by 4 rows matrix keypad ( Includes 3" cable )
KP1-4X4 - 4 columns by 4 rows matrix keypad ( Includes 3" cable )
LCD242 - 24 Characters x 2 lines LCD Display. Connects directly to MINI-MAX/51-C with included cable.
LCD242-BK - 24 Characters x 2 lines LCD Display. Connects directly to MINI-MAX/51-C with included cable. LED Backlit version
LED-1 - LED-1 Board is A peripheral board with four 7-segment LED displays with decimal point. The displays are placed on sockets and can be easily replaced. 4-digit LED-driver with I2C-Bus interface is installed to this board. The segment outputs of LED-driver are controllable current-sink sources. They are switched on by the corresponding data bits and their current is adjusted by control bits. LED-driver on the board is controlled via an I2C-compatible 2-wire serial bus.
MMC-128MB - MMC: MultiMedia Cards for use with MMC/RTC Board. Ideal for building high capacity data loggers using the MINI-MAX and PRO-MAX series boards.
MMC-16MB - MMC: MultiMedia Cards for use with MMC/RTC Board. Ideal for building high capacity data loggers using the MINI-MAX and PRO-MAX series boards.
MMC-32MB - MMC: MultiMedia Cards for use with MMC/RTC Board. Ideal for building high capacity data loggers using the MINI-MAX and PRO-MAX series boards.
MMC-64MB - MMC: MultiMedia Cards for use with MMC/RTC Board. Ideal for building high capacity data loggers using the MINI-MAX and PRO-MAX series boards.
MMC-RTC-1 - MMC/RTC board is a storage flash device which is designed specifically for storage/data logger applications. MMC/RTC board has built-in Multi Media Card (MMC) socket. A Multi Media Card with high capacities such as 128 Megabytes can be installed on this board. MMC/RTC board also includes a DS1307 Real-Time Clock (RTC) from Dallas Semiconductor. The DS1307 has a battery-backed, low power full-BCD clock/calendar with 56 bytes of nonvolatile static RAM. ( Multimedia Card is not included )
MOTOR-1 - Stepper motor driver peripheral board is a peripheral board for the Single Board Computers. It offers complete control and drive for a four-phase unipolar stepper-motor.
PROTO-1 - 2.35" X 2.40" ( 5.97 X 6.10 cm. ) prototyping board with a 20-pin universal expansion connector to interface with MINI-MAX or PRO-MAX series boards. Several prototyping boards can be stacked for custom circuit development. Analog inputs, analog outputs, temperature sensors, relays, displays and many other circuits can be added to MINI-MAX or PRO-MAX boards for rapid project development
RELAY-1 - Relay peripheral board with 1 power relay. Normally Open and Normally Closed Contacts.
RELAY-2 - Relay peripheral board with 2 power relays. Normally Open and Normally Closed Contacts.
RELAY-4REED - Relay peripheral board with 4 reed relays. Normally Open Contacts.
RTC-1 - Real Time Clock board with DS1307 Real-Time Clock from Dallas Semiconductor. The DS1307 is a battery-backed, low power, full-BCD clock/calendar with 56 bytes of nonvolatile static RAM. Address and data are transferred serially via I2C 2-wire bus. The clock/calendar provides seconds, minutes, hours, day, date, month and year information. RTC board has a 3Volt standard lithium battery which allows clock/calendar to operate in the absence of external power.
Standoff Kit-1 - MINI-MAX series of micro-controller boards except a wide range of peripheral boards that can be plugged to the micro-controller board. The standoff kit consists of 12 pieces of plastic screws and spacers.
TB-1 - TB-1 Training Board allows performing various experiments with the MINI-MAX/51-C or other 8051 compatible boards. TB-1 has programmable traffic lights, 4-channel, 8-bit analog inputs, buzzer, switch inputs, and counter/timer inputs to test the interrupts.
TERMINAL-1 - Brings out ports 1 and 3 on the MINI-MAX/51-C to terminal blocks for easier access.
TW523 - TW523 is a two-way X10 power line interface module. When used in conjunction with our X10-1 module, TW523 interfaces MINI-MAX boards to X10 devices.
VFD202 - 20 Characters x 2 lines Vacuum Fluorescent Display. Connects directly to MINI-MAX/51-C with included cable
X10-1 - Connects MINI-MAX/51-C to standard X10 devices through the TW523 Power line interface