{"Description":"

GE Fanuc IC695CPU315 RX3i Controller Module CPU With 2 Built-In Serial Ports; 32K Analog Input\/Output GE Fanuc IC695CPU315 RX3i Controller Module CPU With 2 Built-In Serial Ports; 32K Analog Input\/Output<\/p>","Key Features":"

\u25aa Contains 20 Mbytes of battery-backed user memory and 20 Mbytes of non-volatile flash user memory.<\/p>

\u25aa Provides access to bulk memory via reference table %W.<\/p>

\u25aa Configurable data and program memory.<\/p>

\u25aa Programming in Ladder Diagram, Structured Text, Function Block Diagram, and C. Refer to PACSystems RX7i & RX3i CPU Programmer\u2019s Reference Manual, GFK-2950.<\/p>

\u25aa Supports auto-located Symbolic Variables that can use any amount of user memory.<\/p>

\u25aa Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for analog %AI and %AQ.<\/p>

\u25aa Supports most Series 90-30 modules and expansion racks. For a list of supported I\/O, Communications, Motion, and Intelligent modules, refer to the PACSystems RX3i System Manual, GFK-2314F or later.<\/p>

\u25aa Supports up to 512 program blocks. Maximum block size is 128KB.<\/p>

\u25aa CPU firmware may be upgraded in the field.<\/p>

\u25aa CPU supports firmware upgrades of modules in its backplane.<\/p>

\u25aa Two serial ports: an RS-485 serial port and an RS-232 serial port.<\/p>

\u25aa Ethernet communications via the rack-based Ethernet Interface module (IC695ETM001). For details on Ethernet capabilities, refer to PACSystems RX7i & RX3i TCP\/IP Ethernet Communications User Manual, GFK-2224.<\/p>

\u25aa Time Synchronization to SNTP Time Server on Ethernet network when used with Ethernet Release 5.0 or later module.<\/p>

\u25aa Compliant with EU RoHS Directive 2002\/95\/EC using the following exemptions identified in the Annex: 7(a), 7(c)-I, & 7(c)-III<\/p>"}